Digital MV-RAD electric series

Torque range: 65 – 11.000 Nm

The MV-RAD will quickly tighten or loosen bolts with high accuracy and reliability. The torque can be set by a membrane key control stageless with incensements of 1 Nm. Torque and more parameters can be programmed individually on custom demands. In addition, this torque wrench is equipped with an angle function.

Optional, the MV-RAD also features a special Bolt Check function. This program allows the operator to check if an already tightened bolt is still within torque specification. The MV-RAD is able to verify the existing torque and will not add any extra torque while doing this. If the bolt requires further tightening, it will do so automatically and report the degrees of turn needed. This feature works very well in combination with the Smart socket™.

The 230V or 115V power operation allows the MV-RAD to be used in a variety of places with only 80 dB noise level. Each pistol torque wrench comes fully calibrated in a storage case and includes reaction arm, calibration certificate and operating manual.

• High performance bolting tool with torque shut-off system
• Stageless or 200 torque setting options
• Angle function
• Password protected
• Pistol grip with membrane key and OLED-Display
• 360° rotatable handle
• 8 Programmable presets
• Programming on custom demands
• Bolt check function (optional)
• Controlled bolting – repeatability of +/- 3%
• Extremely low noise level – only 80 dB.

All MV-RAD tools include:

• Reaction arm and retaining ring
• Weatherproof storage case
• User manual
• Calibration certificate

Product range